PRODUCT CENTER

 


Click to enlarge
+
  • 1(1729567136591).jpg

Cyclone vacuum 7.5 kW


Classification:

Cyclone vacuum 7.5 kW

PRODUCT DETAILS

Working principle

7.5 kilowatts use segmented star corners to start the instantaneous start voltage low Requirements for starting voltage requirements have greatly improved the reliability of motor startup

During the startup process, the motor start -up current is proportional to the power supply voltage. When the Star Triangle was launched, the voltage added on each phase winding of the stator was one -third of the roots of the power supply voltage. Therefore, the starting current was only 1/3 of the full voltage start -up current, which greatly reduced the impact of the start -up current on the grid of the grid. Cyclone dust collector parameter configuration table

Working principle: When the dust is pumped into the whirlwind dust collector from the centrifugal fan, it will rotate along the wall from top to bottom. Dust particles are separated from the air flow due to the effect of ingenically, falling into the ash bucket along the wall, and the gas and small debris will be removed by the filter element to eliminate clean gas. The small impurities will be filtered into the whirlwind dust collector by the filter element secondary, and the dust barrel is fell along the wall.

The whirlwind dust collector is mainly suitable for the full -house custom factory vacuum, furniture factory, metal polishing, casting workshop, sand and gravel materials, spraying dust, and molten coal dust, etc. The small dust particles are used for this device.

Equipment configuration: The main frame of the equipment is welded with a 7 -by -7 square tube, two universal wheels, two directional wheels, the main material of the barrel material is made of 3 mm thick iron plates, using stainless steel brackets, 1.5 squares of dust barrel barrels One, uses imported filter elements above 5 microns, the motor is nationwide in the country, quality problems, unconditional maintenance, or replacement of new motors, the motor uses 7.5 kilowatts,

Equipment power: The length of 300 inlets can reach 15 to 20 meters. The amount of air volume 9000 air volume can be brought with 3 to 4 devices.
The length of the inlet of 200 inputs is up to 20-30 meters in length and 13,000 air volume can be brought with 4 to 5 equipment at the same time.
The rated power: 7.5kW voltage 380V full load 3 degrees per hour, and work normally.

Equipment advantages: Whirlwind dust collector is a new type of equipment that can replace traditional cloth bag dust collectors, which is more power -saving, less noise, and better dust removal effect than traditional cloth bag dust collectors.

Product parameters

Project Unit Parameter
Device Model   LJF-CC-7.5
Appearance dimensions m 1.6x0.85x2.4
Tube body quality mm 2.5MM flowerless galvanized steelplate
Cyclone specifications   Inspin 50 series (non-standard 700)
Weight   350 kg
Fan air volume m3/h 8500
Exhaust wind pressure pa 2800
Motor power KW 5.5/7.5
Number of fans Quantity 1
Filter element 1 400x1000
Control mode   Pulse controller
Filter volume m3 30
Dust collection barrel capacity Capacity 200
Noise   <70 Decibel
Dust purification rate   ≥98
Packing size CM 170*95*250

PACKING AND DELIVERY

We will strictly pack them to ensure safe delivery to designated locations.

Jiuling Woodworking Machinery

FACTORY APPEARANCE

Focus on the production of home improvement, board furniture processing machinery

Jiuling Woodworking Machinery

01

Quality Protection

Focus on the production of home decoration and panel furniture processing machinery, provide stable and high -quality marginal band machines for high -end factories, and provide customized services.

Jiuling Woodworking Machinery

02

Advanced Equipment

The company has 21 senior technicians, drawing on the world's leading technology, focusing on the research and development and innovation of panel processing equipment that meets market demand.

Jiuling Woodworking Machinery

03

Corporate Strength

Operating products all over the world, with high quality, high service, and deep customer trust.

CUSTOMER VISIT

We are one of the important places for woodworking machinery and equipment and have been well received by customers from all over the world.

Customer photo
Customer photo
Customer photo
Customer photo
Customer photo

HONOR

Customized one -stop solution

We insist on R&D and innovation, and have obtained more than 35 invention and utility model patents and more than 26 appearance patents; dozens of woodworking machinery products have obtained national patent certification and export CE qualifications.

View More +

PRODUCT SERIES

LEAVE A MESSAGE

Leave your information and provide you with a free product quotation.